GB
Contents
Warning ......................................................2
Electrical connection ...................................4
Get to know your bottle cooler ....................5
Before use ..................................................6
Installation .................................................6
Operation and function ...............................9
Fault finding ..............................................10
Defrosting, cleaning and maintenance .....11
Warranty, spare parts and service ............12
Disposal ....................................................13
CE Declaration of conformity............Page A
Replaceable light
source by a
professional
Replaceable
control gear by
a professional
fig.1
4
Electrical connection
Wiring and connections in power supply
systems must been all applicable (local and
national) electrical codes. Consult these
codes lengths and sizes prior to cabinet
installation.
This device complies with relevant EU
directives including Low Voltage Directive
2014/35/EU and Electromagnetic Compat-
ibility Directive 2014/30/EU
The socket should be freely accessible.
Connect the appliance only to
220 / 240 V / 50Hz alternating current via a
correctly installed earthed socket.
The socket must be fused with a 10-13 A
fuse.
If the appliance is to be operated in a non-
European country, check on the rating plate
whether the indicated voltage and current
type correspond to the values of your mains
supply.
Information regarding voltage, current or
power are given on the rating plate
The power cord may be replaced by a
technician only.
The rating plate provides various techni-
cal information as well as type and serial
number.