Napoleon PT750RSB-INFRARED Mode D'emploi page 6

LIGHTING INSTRUCTIONS
Open lid.
Ensuring burner
controls are in the off
position, turn on the
gas supply valve.
Main Infrared
Burner Lighting
Turn either left or
right infrared
burner control to
high position.
Press and hold
igniter button until
lit, or light by
match.
If ignition is not
immediate, turn
burner control off.
Wait 5 minutes.
The propane cylinder is equipped with an excess flow device. Unless all burners are turned
off prior to turning the cylinder on, only small flames and low heat will be achievable.
Do not use back burner while operating main burner.
6
IGNITER
INFRARED
BURNERS
LIGHTING PORT
HOLE
(BOTH SIDES)
LEFT RIGHT
INFRARED INFRARED
BURNER BURNER
Main Tube
Burner Lighting
Turn left burner
control to high
position.
Press and hold
igniter button until
lit, or light by
match.
If ignition is not
immediate, turn
burner control off.
Wait 5 minutes.
With left burner
operating on high,
turn the centre,
and/or right burner
to high.
LEFT CENTER REAR
TUBE TUBE BURNER
BURNER BURNER
Back Burner
Lighting
Remove warming
rack.
Turn back burner
control to high
position.
Press and hold
igniter button until
lit, or light by
match.
If ignition is not
immediate, turn
burner control off.
Wait 5 minutes.
RIGHT IGNITER
TUBE TUBE
IGNITER
BURNER BURNERS
SIDE
BURNER
Side Burner
Lighting
Open burner
cover.
Turn side burner
control to high
position.
Press and hold
igniter button until
lit, or light by
match.
If ignition is not
immediate, turn
burner control off.
Wait 5 minutes.
SIDE
BURNER