Use; Internal Control - Radiometer Analytical CTV101 Mode D'emploi

Use

Use
Use
Use Use

Internal control

Internal control
Internal control Internal control Internal control
The rotation speed of the EDI101 is adjusted by turning the
potentiometer of the CTV101:
n = rotation speed of the EDI101 in rpm (revolution per minute).
N = rotation speed adjusted in rpm on the potentiometer: 3 digits.
Important
The "5" factor between n et N may undergo slight variations, how-
ever the rotation speed shown on the CTV101 display corresponds to
the real rotation speed of the electrode ± 2 rpm.
Operating Instructions:
Turn the
The rotation speed of the electrode is displayed in rpm.
Adjust the rotation speed of the electrode by turning the
10-turn potentiometer of the CTV101.
Turning the
rotation instantly.
n = 5 N
switch of CTV101 to "0 - 5000 rpm".
switch to "STOP" stops the electrode
10