Publicité
Les langues disponibles
Les langues disponibles
Adding channels to the TV's memory
Your TV will stop on specific channels that are stored in the TV's
channel memory when you press Channel + or –. Use the steps below
to set all active channels in your area automatically.
Programming channels automatically
Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory auto-
matically, you can add or erase channels manually.
To add channels automatically:
1. Press MENU, then press
2. Press
or
until the TV/CABLE
selection is highlighted.
3. Press
or
to highlight either
TV or CABLE, depending on
which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
4. Press
to select CH PROGRAM.
5. Press
or
to start channel programming. The TV will automati-
cally cycle through all the TV or Cable channels (depending on
which you selected), and store all active channels in the channel
memory.
While the TV is cycling through the channels, the message
"PROGRAMMING NOW PLEASE WAIT" appears.
6. When channel programming is complete, the message "COMPLETED
(channel or cable number)" appears.
7. Press Channel
or
Adding and erasing channels manually
After you have programmed the channels automatically, you can add or
erase specific channels manually.
To add or erase channels manually:
1. Select the channel you want to add or erase.
If adding channels, you must select the channel to add using the
Channel Number buttons.
2. Press MENU, then press
to display the SET UP menu.
3. Press
or
to highlight ADD/
ERASE.
4. Press
or
to select ADD or
ERASE, whichever function you
want to perform.
5. Repeat steps 1-4 for other
channels you want to add or erase.
Changing channels
To change the channel, you can:
• change the programmed channels using the remote control
• select a channel directly using the remote control
• scan the channels using the TV buttons
To change to the next programmed channel:
Press Channel + or – on the TV or remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9 and 100).
For example, to select channel 125, press the 100 button, the 2
button, and the 5 button.
3L51501C/E P15-24
15
All manuals and user guides at all-guides.com
or
to display the SET UP menu.
CH
PICTURE AUDIO
SET UP
OPTION
PIP SOURCE
TV
TV / CABLE
TV CABLE
CH PROGRAM
START
ADD / ERASE
ADD
SELECT
ADJUST
to view the programmed channels.
or
CH
PICTURE AUDIO
SET UP
OPTION
PIP SOURCE
TV
TV / CABLE
TV
CH PROGRAM
START
ADD / ERASE
ADD ERASE
SELECT
ADJUST
15
POWER
TV
VCR
CABLE
CH RTN
ENT
1
2
3
100
4
5
6
7
8
9
0
CH +
Channel +/–
VOL
VOL
–
+
MENU/
ENTER
Menu
CH –
EXIT
RECALL TV/VIDEO
FAV
PIP CH
PIP CH
Exit
RESET CAP/TEXT
1/2
FAV
STILL
LOCATE
SWAP
PIP
CODE
MTS
SLEEP
MUTE
POWER
TV
VCR
CABLE
CH RTN
ENT
1
2
3
Channel
100
4
5
6
Numbers
7
8
9
0
CH +
Channel +/–
VOL
VOL
–
+
MENU/
ENTER
Menu
CH –
EXIT
RECALL TV/VIDEO
FAV
PIP CH
PIP CH
Exit
RESET CAP/TEXT
1/2
FAV
STILL
LOCATE
SWAP
PIP
CODE
MTS
SLEEP
MUTE
4/6/2002, 12:46
Publicité
