Publicité
Les langues disponibles
Les langues disponibles
Before using the appliance
The fitting of the appliance should only be
n
carried out by a registered Corgi gas fitter.
Only use the appliance if it has been built in
n
correctly. Damage to an incorrectly installed
appliance is excluded from the guarantee.
During repair the appliance needs to
n
be disconnected from the power supply
(electricity and gas). Remove the plug from
the wall socket or turn the switch in the
metre cupboard to zero (for gas hobs with
a spark switch). Turn off the gas tap in the
feeder pipe.
This cooking appliance is designed for
n
household use. It should only be used for
preparing meals.
When boiling and frying the hob gets hot.
n
Please pay close attention to small children.
Grease and oil are flammable when over-
n
heated. Stay near the appliance when
preparing dishes.
Do not use the appliance to heat the kitchen.
n
This will produce a damp atmosphere.
When a gas cooking appliance is being used
n
heat and moisture is produced in the area
where the appliance is situated. Make sure
that the area is sufficiently ventilated; open
natural ventilation openings. When the hob is
used for longer periods extra ventilation may
be needed, such as an open window.
The burners should not be used without
n
pans. Never place aluminium or plastic trays
directly onto a burner.
Be careful with the cables of electrical
n
equipment, such as a mixer. These should
not be allowed to touch hot burners.
The underside of the built-in hob becomes
n
hot. Take care that you do not place any
flammable or plastic objects in any drawer
under the appliance.
Before installing the appliance, check that
n
the gas sort and gas pressure of the gas
source are in accordance with what is
specified on the model data plate.
Publicité
