ISE SY-T2711 Manuel D'instructions page 22

After using the treadmill for a while,lubricant should be injected. When inject the lubri-
cant, please lift the running belt and inject lubricant to the center of running board, then
put down the belt. After that,press the center of running belt by hands, then rotate the
belt to make lubricant evenly
Please be assured that the box of this product is recycling, the rest of the packaging can be trashed.
In case the product contains batteries, do not trash directly.
This device concerned has been manufactured under an EU
Declaration of Conformity and compliance with all relevant EU
Directives, including EN ISO 20957-1 EN957-6.
TREADMILL LUBRICANT
10
Distributed by:
ISE GmbH
Industriegebiet 6
66453 Gersheim
Germany
TEL：+4968438004827
kontakt@isefit.com
www.isefit.de
Importer:
SAS ISE
1 Chemin d'Armancourt
60200 Compiègne France
TEL : +33 3 44 76 21 66
PORT : +33 6 32 91 85 26
contact@isefit.com
www.isefit.com
EN