Télécharger Imprimer la page

ISE SY-T2711 Manuel D'instructions page 18

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
3. LCD display instruction
LCD shows: Speed, Time, Distance, Calories.
4. Button function
Function button: 4 Speed Shortcuts (3, 6, 9, 12)
"Start" button
"Program" button
"UP" button
5. Button function and operation
"Start" button - Start the motor
"Stop" button - Stop the motor
"Program" button - Auto program selection
"Mode" button - Countdown mode selection
"UP/DOWN" button - Adjust speed when running, adjust parameter value when setting
"Speed Shortcuts" - Directly select speed value when running
6. Sport modes
A. Manual mode Enter manual mode: After the electronic power meter-wide display,
enter the initial standby mode, then press the start button, enter to manual mode.
B. Countdown mode
1. Enter time countdown mode: In the initial standby mode press Kin selection time
countdown mode, where the time window 10:00 minutes and flashing speed by +/- keys
set the desired run time, set the range of 5: 00-99 : 00 minutes, press the start button to
enter the running time countdown mode.
2. Enter distance countdown mode: In the initial standby mode, press the mode button
to select the mode from the countdown, this time from the window 1.0 kilometers and
flashes, the distance traveled by the speed +/- key set the desired setting range 1.0 to
99.0 kilometers, press Start key to enter the distance countdown mode.
3. Enter calories countdown mode: In the initial standby mode, press the mode button
to select the calorie countdown mode, then 50 calories window displays and flashing
speed by +/- keys to set the required run-calorie, setting range from 20 to 990, press the
Start button to enter calorie countdown mode.
C. Auto mode
Enter auto mode: In the initial setting mode or standby state, press the key to enter the
program automatic program selection. At this time window 10:00 minutes and flashes
through speed +/- keys set the desired run time, set the range of 5: 00-99: 00 minutes,
press the Start button to enter the automatic program.
7. Sleep function
When the treadmill stops running without any operating more than 10 minutes into
hibernation, spreadsheets automatically turn off the display, press any key to wake elec-
tronic form, re-enter standby mode after the initial full-display.
8. Safety key function
"Stop" button
"Mode" button
"DOWN" button
6
EN

Publicité

loading

Ce manuel est également adapté pour:

S106