Error Messages - boso medistar+ Mode D'emploi

Error messages

If any problems occur during the measurement, the display will show an error mes-
sage instead of a blood pressure reading.
Meaning of error messages:
Cause of Err message
Inflation pressure in-adequate
after two attempts to inflate.
No pulses were detected that
could be evaluated.
Error during inflation /
No pulses were detected.
Troubleshooting
Keep arm still
Repeat measurement.
Check the positioning of the cuff.
Repeat measurement.
Cuff is possibly not tight
enough.
Repeat measurement.
71
E
EN
FR
IT
ES