Starting Up; Inserting Batteries - boso medistar+ Mode D'emploi

Starting up

The device must be installed and put
into operation in accordance with the
instructions in this manual.
¬ Use only high quality leak-proof bat-
teries of the correct specifications
(see 'Technical data' page 76).
different makes.
correctly, the monitor will not work and
this may cause the batteries to heat up
and leak, damaging the monitor.
¬ Inserting the batteries
Illustration 1
¬ Remove the batteries if the monitor
can become hot and cause burning.
Never mix old and new batteries or
If the batteries are not inserted
The battery compartment is located
on the left side of the monitor. Insert
batteries in the battery compartment
as shown in illustration 1.
is not to be used for any length of
time.
Batteries that are short-circuited
55
E
EN
FR
IT
ES