Roco 03.1050 DB Serie Mode D'emploi page 35

▪ Retrofitting a Plux decoder (only for Item 70030)
First remove locobody (fig. 1). Then remove the
jumper from the interface. Finally put the plug of
the chip into the interface as shown.
70030.indd 35 70030.indd 35
}
siehe
1.
Fig. 1
see
voir
Decoder 16-pin
10895 / 10893
35
02.02.2023 06:59:00 02.02.2023 06:59:00