Publicité
Les langues disponibles
Les langues disponibles
us_main.book.book Page 41 Wednesday, September 23, 2020 1:25 PM
1
Hold the Lock button for three seconds.
• If the display has been locked for over five
minutes, you must deactivate the lock and
then reactivate it.
2
Open the right refrigerator door.
3
Hold the mouthpiece of your phone in front of
the speaker that is located on the right hinge
of the refrigerator door.
4
Press and hold the Freezer button for three
seconds while continuing to hold your phone
to the speaker.
5
After you hear three beeps, release the
Freezer button.
6
Keep the phone in place until the tone
transmission has finished. The display will
count down the time. Once the countdown is
over and the tones have stopped, the
diagnosis will be displayed in the application.
NOTE
• For best results, do not move the phone while
the tones are being transmitted.
Smart Grid Function
When the refrigerator operates in Smart Grid
mode, the Smart Refrigerator function can control
energy usage or delay the operation of some
SMART FUNCTIONS
functions to save energy during peak usage
periods.
• You can override the Smart Grid function any
time (using the Smart Grid button or
application).
• To use the Smart Grid function, you need to
register your application with your electric utility
company, provided that your electric utility
company supports the function. In other words,
the Smart Grid function will not be available if
your electric utility company does not support
the function or does not have the capability to
support the function.
Smart Grid Application Features
• Smart Saving_Demand Response
- You can lower energy usage based on Demand
Response (DR) signals from the utility
company. If the refrigerator is operating in
Smart Saving mode according to the DR signal,
you can see a pop up.
• Seasonal Energy Savings
- Lower energy usage based on time period.
Using the Smart Grid Function
This feature responds to notification events from
your utility company to run high energy
consuming tasks during off-peak periods when
demand is lower. These notification events are
known as Demand Response signals.
If the refrigerator receives a Demand Response
signal from the utility company, the refrigerator
will turn on the Grid LED on the refrigerator
display and control its power consumption
according to the signal. The refrigerator will
respond to the signals received from the utility
company as long as product performance is
maintained.
If the refrigerator receives a Demand Response
signal, the refrigerator will operate in Delay
Appliance Load (DAL) or Temporary Appliance
Load Reduction (TALR) mode.
Delay Appliance Load (DAL)
The refrigerator responds to a DAL signal by
providing a moderate load reduction for the
duration of the delay period.
This mode controls functions that consume a lot of
energy such as adjusting the cooling system,
running the defrost cycle, and making ice.
• When the refrigerator operates in DAL mode,
the Grid LED is illuminated on the refrigerator
display.
41
Publicité
