LAVAZZA A Modo Mio Deséa Mode D'emploi page 49

Fit the supply plug into the power outlet.
Press the On/Stand-by button
chine on. The machine will emit an acoustic signal.
All buttons will come on to a steady white light, whereas
the alarm warning lamps will come on to a steady orange
light over an instant.
MACHINE SETTING
to switch the ma-
49
The coffee machine starts the heating cycle. The On/
Stand-by button will start blinking to a light white.
The machine will be ready when the On/Stand-by but-
ton stops blinking and the supply button lights are
steadily.
When the milk whipping jug is not inserted, the
machine will only turn on the coffee supply buttons
and the temperature selection button. The milk
beverage warning lights will be OFF and the but-
tons will not work.
By pressing one of the supply buttons during the heating
cycle, you can reserve the beverage that will be supplied at
the end of the heating cycle.
Upon the first machine start-up, you shall supply 0.5
litres of water, with no capsule inserted and keeping
the lever lowered.
E N