AL-KO solo Robolinho 4100 Traduction De La Notice D'utilisation Originale page 62

GB
7.9 Setting the secondary area mowing
1.
*"Sub zone mowing"
2. Setting the mowing time periods:
■
"inactive"
ea mowing is switched off.
■
"active"
mows until the rechargeable battery is
flat.
■
"Mowing time in min"
The appliance mows the secondary area
for the set time period. The following
mowing time periods can be set:
30/60/90/120/until rechargeable battery
flat.
7.10 Setting the display contrast
If the display is difficult to read, e.g. in sunlight,
the display can be improved by changing the dis-
play contrast.
1.
*"Display contrast"
2. Increase/decrease the display con-
trast.
7.11 Setting lock
If the setting lock is deactivated, the PIN must on-
ly be entered when acknowledging safety-rele-
vant faults.
1.
*"Safety settings"
2. Activating/deactivating the setting lock:
■
"Activate"
Activate the setting lock.
■
"Deactivate"
Deactivate the setting lock.
7.12 Recalibrating
If the position or length of the boundary cable has
been changed or the appliance no longer finds
the boundary cable, recalibration is necessary.
1. "Reset calibration"
2. "Reset loop calibration data?"
3. Carrying out a calibration movement: see
chapter 5.4 "Carrying out an automatic cali-
bration movement", page 58.
62
All manuals and user guides at all-guides.com
: Secondary ar-
: The appliance
:
:
7.13 Restoring factory settings
The factory settings of the appliance can be re-
stored, e.g. before selling the appliance.
1.
*"Factory reset"
message: "Factory reset completed"
8 DISPLAYING INFORMATION
The "Information" menu is used for displaying
machine data. No settings can be made in this
menu.
:
1. Call up the main menu.
2.
*"Information"
3. Select the menu item.
Note: The menu items are described in the
following sections.
4. Return to the main menu.
"Blades service"
Shows in how many operating hours a blade ser-
vice is required. The counter can be reset manu-
ally. Have the blade service carried out by an AL-
KO dealer, technician or service partner.
Reset the counter for blade service:
1. "Confirm"
"Hardware"
Shows information on the appliance, such as
type, year of manufacture, operating hours, serial
identification number, number of mowing inserts,
total mowing time, number of charging cycles, to-
tal charging time, length of the loop of the bound-
ary cable.
"Software"
Shows the firmware version.
"Program Info"
Shows current settings such as the total weekly
mowing time.
"Failures"
Shows the fault messages that last occurred with
date, time and fault code.
Displaying information
Robolinho 4100