AL-KO solo Robolinho 4100 Traduction De La Notice D'utilisation Originale page 59

Operation
6 OPERATION
6.1 Starting the appliance manually
1. Switch on the appliance.
For unscheduled edge mowing: see chapter
7.7 "Edge mowing with a manual start",
page 61.
2. Start the appliance manually.
6.2 Cancelling mowing
■
Press the button on the base station
(08/4) or on the appliance.
The appliance moves automatically into the
base station. It deletes the mowing plan of
the current day and starts again the next day
for the set time.
■
Press the
The mowing is interrupted for half an hour.
■
Press the button on the appliance.
The appliance is switched off.
NOTE
In dangerous situations, the appliance
can be stopped with the STOP but-
ton (09/2).
6.3 Mowing the secondary area (01/NF)
1. Lift the appliance and place in the secondary
area by hand.
2. Switch on the appliance.
3. Call up the main menu.
4.
*"Settings"
5.
*"Sub zone mowing"
6. Select the mowing time with
7. Start the appliance manually.
Depending on the setting: The appliance mows
for the set time period and then switches off or
mows until the rechargeable battery is flat.
After mowing the secondary area, place the ap-
pliance in the base station again by hand.
457296_b
All manuals and user guides at all-guides.com
button on the appliance.
.
7 SETTINGS
7.1 Calling up the setting – General
1. Call up the main menu.
Note: The asterisk * in front of the menu item
indicates that it has just been selected.
2.
*"Settings"
3. Select the required menu item.
4. Make the settings.
Note: The menu items are described in the
following sections.
5. Return to the main menu.
NOTE
Further menu items: see chapter 5.2
"Making the basic settings", page 58.
7.2 Setting the cutting height
The cutting height can be adjusted to between
3 – 6 cm with a step width of 1 mm.
1.
*"Cutting Height"
■
*"Cutting Height XXmm": Se-
lect the required cutting height.
■
Press "Confirm".
The blade plate sets itself to the selected cutting
height first and the blades only begin to turn
when the appliance begins to mow.
7.3 Activating/deactivating the button tones
1.
*"Key clicks"
2. Activating/deactivating the button tones:
■
"Activate"
Activate the button tones.
■
"Deactivate"
Deactivate the button tones.
:
:
59