Bosch GWS 12-125 S Professional Notice Originale page 9

a power failure or when the mains plug is pulled. This
prevents uncontrolled restarting.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for cutting, roughing and brush-
ing metal and stone materials, as well as making holes in
stone materials using diamond core cutters, without the use
of water.
A separate protective guard for cutting must be used when
cutting with bonded abrasives.
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
The power tool must not be used to grind concrete.
Technical Data
Angle grinder
Article number
Rated power input
Power output
Rated speed
Speed adjustment range
Max. grinding disc diameter
Grinding spindle thread
Max. thread length of grinding spindle
Speed preselection
Restart protection
Soft start
Bosch Power Tools
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Unlocking lever for protective guard
(2) Spindle lock button
(3) On/off switch
(4) Speed preselection thumbwheel
(5) Auxiliary handle (insulated gripping surface)
(6) Protective guard for cutting
(7) Protective guard for grinding
(8) Extraction guard for grinding
(9) Mounting flange with O‑ring
a)
(10) Carbide grinding head
a)
(11) Grinding disc
a)
(12) Cutting disc
(13) Quick-clamping nut
(14) Clamping nut
(15) Quick-clamping nut with bar
(16) Two-pin spanner for clamping nut
(17) Grinding spindle
(18) Handle (insulated gripping surface)
(19) Extraction guard for cutting with cutting guides
a)
(20) Diamond cutting disc
a)
(21) Hand guard
a)
(22) Cup brush
a)
(23) Rubber sanding pad
a)
(24) Abrasive disc
a)
(25) Round nut
a)
(26) Diamond annular cutter
a)
(27) Open-ended spanner
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GWS 12-125 S
3 601 CA6 0..
W 1200
W 630
-1
min 11,000
-1
min 2,800–11,000
mm 125
M 14
mm
English | 9
a)
a)
a)
a)
a)
GWS 12-150 S
3 601 CA6 0..
1200
630
10,000
2800–10,000
150
M 14
22 22
● ●
● ●
● ●
1 609 92A 72X | (23.06.2022)