KTM A46039974044 Instructions De Montage page 27

5.3 Activating the quickshifter
5.4 Programming the quickshifter
Info
If the shifting performance of the quickshifter starts to decrease, it must be reprogrammed.
The engine characteristic can be changed using button
6
button on the combination switch.
Traction control can be activated using the TC button
combination switch.
The quick shifter can also be activated via the combination switch.
–
Press the QS button
The QS indicator lamp lights up when the quickshifter is
activated.
Info
The quickshifter is not activated when shifting up from
first to second gear, and the clutch lever must be used
when shifting up instead.
Even if the quickshifter is activated, you need to use
the clutch lever to shift down.
504095-01
–
Perform starting steps (see owner's manual --> Starting the
vehicle).
–
Press and hold the QS button
The QS indicator lamp flashes.
–
Pull the clutch lever, engage first-gear and press the shift lever
as far down as it will go for at least a second.
–
Briefly press the QS button
The QS indicator lamp lights up blue, the teaching proce-
dure was successful.
504095-01
Info
If the quickshifter cannot be activated, the teaching
procedure was unsuccessful and must be repeated.
8
to switch the quickshifter on or off.
8
for at least 10 seconds.
8
.
ASSEMBLY 5
5
and
7
on the
11