KTM A46039974044 Instructions De Montage page 26

5 ASSEMBLY
–
Position the fixed grip and tighten screw
Guideline
Screw, fixed grip
Diamond
Final steps
–
Install the start number plate (see Owner's Manual).
5.2
10
M4
A
must be located at the top.
Combination switch
504094-01
3
.
5 Nm (3.7 lbf ft)
Operating the combination switch
Possible states
STANDARD – STANDARD mapping is activated when
1
the indicator lamp
STANDARD with TC – STANDARD mapping with
1 TC
traction control is activated when the indicator
B
lamp and the TC indicator lamp light up.
ADVANCED – ADVANCED mapping is activated when
2
the indicator lamp
ADVANCED with TC – ADVANCED mapping with
2 TC
traction control is activated when the indicator
C
lamp and the TC indicator lamp light up.
Caution
Voiding of the government approval for road use and the ins-
urance coverage If the combination switch is mounted,
the vehicle's road permit, if any, expires.
–
Only operate the vehicle in closed-off areas remote
from public road traffic if the combination switch is
installed.
504093-01
Loctite ®
B
lights up.
C
lights up.
243™