JMA SR-4V Notice D'utilisation page 39

5.2.9 GENERATING FIXED REMOTES
As with rolling codes, this option allows you to generate fixed code remo-
tes from among those reprogrammed in the application or to load a code
that you stored earlier.
When you select this option, the following window opens.
Select the manufacturer, the type of remote you wish to generate, the fre-
quency, desired switch positions, the channel and the SR remote buttons
on which this remote is to be generated.
Finally press 'Generate' to create the remote and the application will send
the code.
The lower progress menu will demonstrate the code sent percentage. As
the remote has to save all the information after sending, it will progress
more slowly after 75%. Wait patiently until it finishes saving and the
following message will be displayed.
When the copy has finished, the application displays a reminder of the
frequency to which this remote should be set.
In the specific case of the 'Mastercode' remote, there's a new field for
entering 'Personalisation' and 'Individualisation' as these are values that
are usually loaded on 'Mastercode' remotes.
As when generating rolling code remotes, you can also generate a fixed
code using previously saved codes.
As for rolling codes, the codes are filtered according to the search
criteria and the desired code is selected. Then press the 'Load' button.
When the code is loaded the application displays the 'Generate fixed
code' screen with the digital signal of the code loaded. Simply select the
frequency and buttons where you want to save that code on the SR.
39