JMA SR-4V Notice D'utilisation page 38

5.2.8 GENERATE A ROLLING CODE REMOTE
This option allows you to generate a series of rolling codes that are recog-
nised by the application. The remote can be created from scratch or you
can load it with a code that you saved earlier and modify the desired data,
usually the serial number, to create a compatible remote.
In the first case, the following window opens.
You need to know the data for the remote you are going to generate, such
as the manufacturer, serial number and counter or the seed and personali-
sation if necessary.
In the example displayed here, the manufacturer is 'Mutancode' and the
serial and meter numbers have been entered. In addition, this particular
manufacturer tends to have a personalisation number, so this value is
entered if you know what it is. If no value is entered enter, zero will be
allocated.
In the case of other manufacturers such as 1st GEN JCM, 2nd GEN JCM
or GO, you need to select the type of JCM so that the second combination
is suitable. The example shows the manufacturer '1st GEN JCM' type
'FORSA'. You can also see that 'Personalisation' and 'Seed' are disabled
as this manufacturer doesn't use them.
Once the values have been entered, press the 'Generate' button and
the remote will be duplicated. The bottom application will indicate 'The
38
following remote has been generated: XXXXX'
If you don't know the information to enter to generate a remote, you can
load a previously saved code and modify the desired data, normally the
serial number, to create a compatible remote.
When you press 'Generate Rolling Remote' -> 'Load Remote' the
following window opens.
Here you can search the codes stored by various criteria such as the day,
moth, year, client, remote, frequency, or code type installation.
Once you have searched under the required criteria, choose the selected
code and press 'Load'. The rolling code generation window will open,
showing the data saved and allowing you to modify any of these pieces
of information. As above, press 'Generate' and the remote will be
copied.