Olympus PT-033 Mode D'emploi page 58

Check the operation of the loaded camera.
After sealing the Case, make sure the camera is functioning properly.
1. Press the POWER button on the Case and confirm that the camera
turns ON/OFF.
2. Press the /
camera modes switch properly.
3. Press the shutter lever on the Case and confirm that the camera
shutter releases.
Check the other control buttons on the Case to confirm that the
camera functions properly as intended.
CAUTION
: • If the camera does not function properly, restart the digital
camera installation procedure from "Check the digital
camera." on page E-14 of this manual.
/SCN button on the Case and confirm that the
E-19