Velleman WB018 Notice D'emploi page 4

5. Installation
Refer to the illustrations on pages 2 and 3 of this manual.
1) Use the ceiling mounting bracket to determine and indicate the position of the mounting holes.
1a) When mounting on a brick or concrete ceiling, drill holes size Ø8mm and at least 60mm deep
at the indicated positions. Insert the included anchors [D] and mount the ceiling mounting
bracket on the ceiling using the 4 included screws [C].
1b) When mounting on a wooden ceiling or wall support, drill holes size Ø3mm and at least 60mm
deep at the indicated positions. Make sure all the holes are blind holes. Mount the ceiling
mounting bracket on the ceiling using the 4 included screws [C].
2) Attach the pole with the larger diameter to the ceiling mounting bracket, side opening closest
to the bracket. Use bolt [J] and nut [M] and 2 screws [K]. Slide the cover over the pole, line
up the rubber taps with the holes in the ceiling bracket and push the cover in place.
3) Slide the other pole into the fixed pole until the desired height is reached. Line up the holes
from the inner and outer pole and use bolt [J] and nut [M] together with screw [L] to
secure the inner pole. Close the bottom of the inner pole with cap [N] and the front with cap
[O].
4) Mount the TV mounting bracket on the back of the TV as indicated. Depending on the TV
screen, use the correct screws [A] or [B].
5) Hold the screen tight while attaching the TV mounting bracket to the inner pole. Use bolt [E]
and nut [F] together with the 2 washers [H] as indicated. Position the TV in the desired
horizontal angle and tighten the nut [F].
6) Guide the TV cables through the poles.
7) To change the vertical angle of the TV-screen, hold the TV tight and loosen the turning knob
(counter clockwise), move and hold the screen into the desired angle while tighten the
turning knob (clockwise).
6. Technical specifications
LCD/plasma size
dimensions
Use this device with original accessories only. Velleman nv cannot be held responsible in
the event of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product and the latest version of this user manual, please
visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No
part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior
written consent of the copyright holder.
1. Inleiding
Dank u voor uw aankoop! Lees deze handleiding grondig voor u het toestel in gebruik neemt. Werd
het toestel beschadigd tijdens het transport, installeer het dan niet en raadpleeg uw dealer.
2. Veiligheidsinstructies
• De garantie geldt niet voor schade door het negeren van bepaalde richtlijnen in deze handleiding
en uw dealer zal de verantwoordelijkheid afwijzen voor defecten of problemen die hier
rechtstreeks verband mee houden.
• Schade door wijzigingen die de gebruiker heeft aangebracht valt niet onder de garantie.
• Gebruik het toestel enkel waarvoor het gemaakt is. Bij onoordeelkundig gebruik vervalt de
garantie.
06/05/2011
max. load
rotation
plate
base
height
weight
Gebruikershandleiding
WB018
10"-30" / 25-75cm
25kg / 55lbs
40° up/down
190° left/right
115 x 115mm
Ø160mm
625 ~ 880mm
1.7kg
4
© Velleman nv