LD Systems U500 IEM Serie Manuel D'utilisation page 12

SAVE PRESET
Settings under RF SETTINGS, AUDIO SETTINGS and the individual name can be stored in up to 10 different presets. Once you have made the appropriate
settings, press the transmitter's rotary-push encoder (MENU) to enter the main menu, then turn the encoder to select SAVE PRESET (highlighted)
and press the encoder to con昀椀rm. Now select the preset number you want to use for saving by turning the encoder (01 - 10), con昀椀rm by pressing
the encoder, then select YES by turning the encoder and con昀椀rm by pressing the encoder twice. If you want to cancel the process, select NO and
likewise con昀椀rm. Brie昀氀y (!) press POWER to return directly to the main display; after about 12 seconds of inactivity the main display will appear
automatically.
LOAD PRESET
Press the transmitter's rotary-push encoder (MENU) to enter the main menu, then turn the encoder to select LOAD PRESET (highlighted) and press
the encoder to con昀椀rm. Now select the preset number you want to load by turning the encoder (01 - 10), con昀椀rm by pressing the encoder, then se-
lect YES by turning the encoder and con昀椀rm by pressing the encoder twice. If you want to cancel the process, select NO and likewise con昀椀rm. Brie昀氀y
(!) press POWER to return directly to the main display; after about 12 seconds of inactivity the main display will appear automatically.
VIEW SOFTWARE VERSION (SOFTWARE)
Press the rotary-push encoder of the transmitter (MENU) to enter the main menu and then select SOFTWARE (highlighted) by turning the encoder.
Brie昀氀y (!) press POWER to return directly to the main display; after about 12 seconds of inactivity the main display will appear automatically.
LEAVE MAIN MENU (EXIT)
To leave the main menu and return to the main display, select EXIT (highlighted) by turning the rotary-push encoder and press the encoder. Brie昀氀y
(!) press POWER to return directly to the main display; after about 12 seconds of inactivity the main display will appear automatically.
12