Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
22
Problem
I see some peeling
off spots inside my
Airfryer.
White smoke comes
You are cooking fatty
out of the appliance.
ingredients and the fat reducer
is not put in the pan.
The pan still contains greasy
residues from previous use.
Breading or coating did not
adhere properly to the food.
Marinade, liquid or meat juices
are splattering in the rendered
fat or grease
My display shows 5
This is an error code.
dashes as illustrated
in the picture below.
Possible cause
Some small spots can appear
inside the pan of the Airfryer
due to the incidental touching
or scratching of the coating
(e.g. during cleaning with harsh
cleaning tools and/or while
inserting the basket).
Solution
You can prevent damage by lowering the
basket into the pan properly. If you insert the
basket at an angle, its side may knock against
the wall of the pan, causing small pieces
of coating to chip off. If this occurs, please
be informed that this is not harmful as all
materials used are food-safe.
Carefully pour off any excess oil or fat from the
pan, place the fat reducer in the pan and then
continue cooking.
White smoke is caused by greasy residues
heating up in the pan. Always clean the pan,
basket and fat reducer thoroughly after every
use.
Tiny pieces of airborne breading can cause
white smoke. Firmly press breading or coating
to food to ensure it sticks.
Pat food dry before placing it in the basket.
1.
Unplug the appliance and let it rest for 5
minutes before plugging in again.
2. If your display still shows the dashes, call
the Philips service hot line or contact the
Consumer Care Center in your country.
Publicité
