Hornbach 5905357 Manuel D'installation Et De L'utilisateur page 123

Tightening the screw adjusts
the awning towards a straighter
orientation.
Loosening the screw adjusts
the awning towards an inclined
orientation.
Once the desired pitch angle is
set, tighten the two nuts on the
side of the articulated arm 5, by
use of a 17 mm wrench.
Repeat the same procedure on
the other side of the awning.
Make sure to adjust the pitch
angle evenly on both sides, so
that the front profile 2 remains
horizontal.
The awning can withstand light
rain showers if the pitch angle
is 15° or more. You can set the
angle between 15° and 30°.
However, we do not recommend
a pitch angle of less than 15°.
To set a pitch angle of 15° or
more, extract the awning to the
length of 1 meter, set a 1 m level
on top the awning and hold it in
a level position.
The distance between level and
front profile 2 must be 25 cm
(15°) or more so that the awning
can withstand light rain.
4
5
6
25 cm
ENGLISH | 123