Hornbach 5905357 Manuel D'installation Et De L'utilisateur page 120

Awning 1x
Electrical connection: Select the
installation site in such way that
the power plug 4 can be connect-
ed to a suitable mains socket.
Measure the distance between
the outsides of the articulated
arm brackets.
Mounting bracket 2x (e.g. in
concrete)
The mounting brackets must be
installed level and at least 3.1 m
above the ground.
The distance between the in-
sides of the mounting brackets is
x + 4 cm.
Mark the installation holes of the
mounting brackets on the
According to your wall type,
drill the holes and install the
fastenings. Check that the wall
anchors are secure. The sleeve
must sit fl ush with the wall.
Install the mounting brackets to
the fastenings and check them
for secure fi t.
Alternatively the mounting brack-
ets can be installed to a ceiling,
using its two upper
Cassette awning 1x
Install the square tube of the
cassette awning 6 to the lower
openings of the mounting brack-
ets and secure it with the two
screws supplied.
120 | ENGLISH
1
2
wall.
3
holes.
4
Outside of brackets = x
=
x + 4 cm
=