Hand Crank 1x
Install the hand crank 3 to the
hand crank eyelet on the left
end bracket of the awning.
If the motorized extraction and
retracting of the awing is not
possible (e.g. blackout), then the
hand crank eyelet and the hand
crank 3 can be used for manual
operation.
Rotate the hand crank 3 in either
clockwise or anti-clockwise
direction in order to extract or
retract the awning.
Keep the hand crank 3 in a
vertical position during use to
prevent the hand crank eyelet
from damages.
Connect the power plug 4 to the
mains socket.
Point the remote control at the
IR sensor of the awning.
Press the buttons on the remote
control to extract and retract the
awning.
Press and hold button 7 to ex-
tract the awning. Press button 9
to retract the awning. Press but-
ton 8 to stop its movement.
Always watch the awning if you
are extracting or retracting it.
Caution! Do not place any
objects on top of the awning.
Do not touch the moving parts
of the awning during extracting
and retracting. Do not manu-
ally force the articulated arms 5
closer together; this will damage
the mechanism.
5
6
7
ENGLISH
|
121