Publicité
Les langues disponibles
Les langues disponibles
4. Basic functions
Functions
Displaying the temperature
or humidity level of the cellar
Changing the cellar fan
to quiet mode
Exiting quiet mode
Locking the remote control
key pad
Unlocking the remote control
key pad
Placing the remote control
screen on standby
Exiting screen standby mode
Switching off the appliance
with the remote control
Starting the appliance
with the remote control
Defrost mode
5. User menu
Access to menu
• Even if the screen is off, press
• Change screens with
• To exit the menu, press
Setting
• Access with
OK
-
• Change the value with
• Validate with
OK
A. Setting the 12 or 24 hour time display
Changes from 12 hr AM/PM mode to 24 hr display
B. Setting the time
Setting of hours then
,
OK
Setting of minutes, validate with
Action
Press
-
Press
for 2 seconds
-
Press
Press
Then simultaneously
Press
Then simultaneously
Press
for 2 secs
Press
for 2 seconds
Press
for 6 seconds
Press
for 2 seconds
Press and hold down
for 6 secs
+
OK
Displays
Comments
The screen alternately displays the
temperature and humidity value
%
The fan changes to low speed for 10 mins
Disappears
The fan returns to its normal speed
Disparait
Flashes
You can no longer change the settings
Clignote
by pressing the buttons
Is steady
Clignote
Flashes
The buttons are accessible for changing
Clignote
settings
Disappears
Disparait
The screen goes off after a few seconds.
The appliance continues to operate
The screen comes on and displays the
current values
Red LED on appliance. The conditioner
is switched off but the compressor sump
heater protective function remains active
The appliance starts.
or
is steady
If the
ou
ou
est xe
est xe
est xe
flashing, the appliance is in standby mode.
Allows you to start manual defrosting as well
as automatic defrost mode every 7 hrs
C. Setting the temperature unit °C or °F
Setting °C / °F
D. Calibrating the temperature sensor
This is set at 0 in the factory. It must only be changed if there is a
discrepancy between the set temperature and the actual temperature
inside the cellar.
E. Setting the status of the fan when the setting
is reached
Off: Stopping slow-speed ventilation (EC motor)
Allows ventilation at slow speed when the appliance reaches its
humidity and temperature setting.
It is recommended to leave this setting on when the evaporator is
encased.
and
indicator lights are
ou
ou
est xe
9
Publicité
