SPM SP Série Manuel D'utilisation Et D'entretien page 31

- Stop the freezing system and let the machine
run with the only auger activated (position O for
the small button, position I for the main one) for
ten minutes.
- After unlocking the main cover with its key
(fig.9), remove the main cover and the
secondary one under it (fig.10).
- Pour lukewarm water into the bowl (fig.11)
and, after re-positioning the main cover, make
the scraper auger rotating for some minutes.
SP is equipped with a very efficient safety
mechanism, activated when the cover is lifted,
designed to protect the operator. If the cover
is not correctly positioned SP will not work.
- Empty the bowl and repeat the same
operations until the coming out water is clear
(fig.12).
Data di emissione: Dicembre, 2018
NOTE
Revisione: 1
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Pag. : 31/60