Mastervolt Windmaster 500 Manuel D'utilisation page 9

ENGLISH
Model
Part number:
Manufacturer:
Operating temperature:
Storage temperature:
Relative humidity:
Protection degree:
Safety class:
Galvanic isolation
Dimensions (H x W x D):
Weight:
Enclosure:
Mounting
Input (DC)
Nominal power:
Operating voltage range:
Full power voltage range:
Max current:
Max short current:
Start-up power:
Connectors:
Paralleling
Output (AC)
Voltage:
Nominal power:
Nominal current:
Fuse:
Frequency:
Cos phi:
Stand-by power:
Maximum efficiency:
Mains cord:
Safety Functions
Anti-Islanding
Over temperature
Polarity
Surges
User Interface
Front indicator
Normal operation
Fault indication
Communication
National grid connection regulations
Approvals:
Country compatibility
Windmaster 500
140000500
Mastervolt, Amsterdam, the Netherlands
-20°C to 50 °C (full power up to 40 °C)
-20°C to 70 °C
Max. 95%, non condensing (electronics have anti-moisture coating)
IP23 (for indoor use)
Class II Double insulated
Class II HF transformer
365 x 143 x 75 mm (including connectors)
Approx. 2 kg.
UL 5V fire retardant ABS/PC
Wall mounting bracket included
550 W DC
35 -150 V DC
65 -125 V DC
8 A
12 A
1 W
MultiContact 4mm type connectors ; adapters are included
Multiple units can be operated in parallel to increase output power
The DC-input of each unit must be protected by a 10 A DC (slow blow) fuse
230V (185 V - 264 V)
525 W
2,25 A
3,15 A -T
50 Hz (48-52 Hz)
0,99
< 0,05 Wac
93%
1,8 meter of AC wire
Voltage- and frequency window; frequency shift G83 compliant
Power derating at > 40 °C; switch off at internal over temperature
Protected against inverse polarity
Protected against AC and DC surges caused by indirect lightning strike
Dual color (yellow/red)
Yellow blinking (faster blinking = higher power)
Red flashing (6 different codes)
PC-Link adapter and cable for RS-232 communication included. PC software
downloadable from www.mastervolt.com
G83 (GB); NTA 8493 (Netherlands)
Standard suitable for all 230V / 50 HZ countries. Country specific settings
programmable. External ENS may be required for some countries
(contact your local distribution network operator for local grid connection requirements)
SPECIFICATIONS
9