Numatic WV 370 Traduction Du Manuel D'utilisation D'origine page 11

Dry Mode maintenance/fault fi nding
If the vacuum cleaner stops working switch off and remove the plug from the wall before investigating were the fault lies.
If the vacuum cleaner will not pick up any debris from the surface, switch off and remove the plug from the wall, inspect
the fl oor tool, wands and hose for blockages, if no blockages are found, the dust bag may be full if the dust bag is not full
the fi lter may be blocked.
Wet mode
If the vacuum cleaner stops working switch off and remove the plug from the wall before investigating were the fault lies.
If the vacuum cleaner has a blockage and will not pick up liquid, switch off and remove the plug from the wall, has the
fl oat valve operated, this will shut off the suction and the pitch of the vacuum motor will change.
Remove the power head and empty the liquid out of the container, if the container is empty, check that the fl oor tool
wands and hose are not blocked.
Flush the system with clean water after use.
After use always inspect the machine for damage.
Motor AirFlo
1060W 49 L/sec
Capacity Dry Capacity Wet
370: 15 Litres 370: 9 Litres
380: 15 Litres 380: 9 Litres
470: 27 Litres 470: 20 Litres
800: N/A 800: 44 Litres
Suction
2400mm
Size
370: 360 mm x 370 mm x 510 mm
380: 360 mm x 370 mm x 510 mm
470: 360 mm x 370 mm x 710 mm
800: 430 mm x 430 mm x 780 mm
Cleaning Range
26.0m
Sound Pressure (LpA)
73 - 77 dB (Dry)
Uncertainty (KpA)
0.2 dB (A)
Fault Finding
Class
II
Weight
370: 9 Kg
380: 9 Kg
470: 9.6 Kg
800: 12.25 Kg