Smeg 123443 Manuel D'utilisation page 16

Setting the time for AUTO START mode
Use this setting to program the appliance to
switch on automatically to prepare the drip
coffee at a time selected by the user.
To set the auto start time, proceed as
follows:
1. Check that the displayed time is correct.
If not, set the current time as described in
the paragraph "3.1 Before first use".
2. Hold down the
to set the time for the AUTO START
mode: the LED of the
time display (HH:MM) start to flash.
3. Use the lever, moving it up or down to set
the desired time.
4. Confirm the time by placing the lever in
the central position and pressing it: the
appliance will beep.
5. At the end of the setting, the time set for
AUTO START will be automatically
stored.
16
button for 3 seconds
button and the
Use
AUTO START mode
1. Press the AUTO START
activate the AUTO START mode: the LED
of the AUTO START
up and the hours and minutes set for the
coffee preparation will flash on the
display for a few seconds. Then the
current time will be displayed.
2. Press the AROMA
the desired coffee intensity in AUTO
START mode. If necessary, depending
on the quantity to be dispensed in AUTO
START mode, press the 1-4 CUPS
function button to store the function.
3. The appliance remains in AUTO START
mode until the pre-set time is reached,
confirmed by a beep.
4. At the set time, the appliance switches to
BREW mode, brewing the coffee
according to the selected settings.
5. Press the AUTO START
any time to exit the AUTO START mode:
the appliance will beep and return to
CLOCK mode.
button to
button will light
button to select
button at