Smeg 123443 Manuel D'utilisation page 15

1-4 CUPS function setting
This function allows you to dispense a small
amount of coffee, corresponding to about 4
cups.
The setting is OFF by default.
To select the 1-4 CUPS function:
1. Press the appropriate button
to ON: the LED of the 1-4 CUPS
function button lights up.
2. Press the button
function to OFF: the LED on the button
goes out.
CLOCK mode
In this mode, the appliance shows the
current time on the display and the ":"
symbol flashes intermittently every second.
After about 1 minute, the display dims.
All the LEDs of the buttons are off.
To return to the time setting mode, keep the
lever pressed in the central position for 3
seconds: the appliance beeps and the time
setting mode is activated, see "3.2 First
use".
If no button is pressed, the
appliance enters stand-by mode
after 2 minutes.
Use
to set it
again to set this
KEEP WARM mode
The KEEP WARM mode is activated
automatically after the coffee has been
brewed, keeping the Keep Warm plate on
for 20 minutes.
In this way, the coffee will be hot for 20
minutes after the coffee has been brewed.
In KEEP WARM mode, the LED of the ON/
OFF button flashes slowly, the KEEP
WARM icon lights up on the display,
and the LEDs of the
are off.
The ON/OFF
automatically when the KEEP WARM mode
ends.
You can manually end the KEEP WARM
mode at any time by pressing the ON/
OFF button: the LED of the ON/OFF
button and the KEEP WARM
icon go out.
The KEEP WARM mode does not
activate if the BREW mode is
manually interrupted.
and buttons
button turns off
15