Unpacking And Inspection - SEFRAM 3515F Manuel D'utilisation

Feature
˙ 10000 Count digital display
˙ Active Backlit,Large scale display
˙ VoltSense (None Contact Voltage)
˙ Analog Bar graph
˙ True RMS reading on AC and AC+DC mode
˙ Torch lightening when clamping
˙ Auto AC/DC 1000 Amps capability and selection (For 3535F)
˙ Auto AC/DC 600 Amps capability and selection (For 3525F)
˙ Auto AC/DC 1000 Volts capability and selection
˙ Auto Ohms/Continuity/Diode selection
˙ 100K Resistance capability
˙ Continuity Beeper
˙ Frequency Counter
˙ Power and Power factor measurement
˙ Total Harmonics distortion and Harmonics 1 to 25
˙ Capacitance capability
˙ °C / °F Temperature Function ( For 3535F)
˙ Inrush Current
˙ DCA Auto-Zeroing Key (For 3525F, 3535F)
˙ Peak Hold
˙ MIN/MAX HOLD
˙ Smart Data Hold
˙ Phase rotation indication
˙ Flex AC Current
˙ High frequency rejection
˙ Auto Powet Off
˙ CAT.Ⅳ 600V / CAT.Ⅲ 1000V Safety Standard

Unpacking and Inspection

Upon removing your new Power Clamp Meter from its packing,
you should have the following items:
1. APPA 130F Series Power Clamp Meter
2. Test leads. set (one black, one red)
3. Temperature Probe (for 3535F)
4. User Manual
5. Carrying case
6. Battery Installed
M35X3F M00
3