Measuring Capacitance - SEFRAM 3515F Manuel D'utilisation

 CAUTION
To avoid possible damage to the Meter or to the equipment
under test, disconnect circuit power and discharge all high -
voltage capacitors before measuring resistance and diode.
Note :
- Select "Ω", " " or " " indicator then press the navigator key
to enter the Ω/ / mode.
- Select "Ω", " " or " " indicator then press the navigator key
for more than 2sec to return to the AUTO SENSE mode.
- The red LED will turn on, if the resistance of DUT is < 30Ω.
Note - Under diode mode, LCD displays "bad" when measuring
a diode conducted at forward and reverse bias.

Measuring Capacitance

Set the rotary switch to the " " position.
Capcitance
M35X3F M00
19