Calpeda GM 5-9 Instructions Pour L'utilisation page 9

1.4 Warranty
For the product warranty refer to the general terms
and conditions of sale.
i
The warranty covers only the replacement and
the repair of the defective parts of the goods
(recognized by the manufacturer).
The Warranty will not be considered in the following
cases:
- Whenever the use of the device does not conform
to the instructions and information described in this
manual.
- In case of changes or variations made without
authorization of the manufacturer.
- In case of technical interventions executed by a
non-authorized personnel.
- In case of failing to carry out adequate maintenance.
1.5 Technical assistance
Any further information about the documentation,
technical assistance and spare parts, shall be reque-
sted from: Calpeda S.p.A. (paragraph 1.2).
2 TECHNICAL DESCRIPTION
Submersible drainage pump constructed with
composite polymers developed especially for this
product.
With float switch for automatic start/stop.
2.1 Intended use
Standard construction
- For clean or slightly dirty water, with solids in
suspension up to 5 mm grain size.
- For draining flooded rooms or tanks.
- Extraction of water from ponds, flowing water or pits
for collection of rain water.
- For irrigation purposes.
- Maximum liquid temperature: 35 °C.
- Tipo di servizio: S1.
- Maximum liquid density: 1100 kg/m
- Maximum immersion depth: see indicator plate
(with cable of suitable length).
For outdoor use the power supply cable must have
a length of not less than 10 m.
2.2 Improper use
The device is designed and built only for the purpose
described in paragraph 2.1.
Do not use in garden ponds, tanks or
swimming pools when people are in the
water.
The Pump cannot be used in explosive or
flammable environments.
Improper use of the device is forbidden, as is
use under conditions other than those
indicated in these instructions.
Improper use of the product reduces the safety and
the efficiency of the device, Calpeda shall not be
responsible for failure or accident due to improper
use.
GM5-9 Rev. 1 - Operating Instructions
2.3 Marking
The following picture is a copy of the name-plate that
is on the external case of the pump.
1
2
3
5
13
1 Pump type
2 Delivery
3 Head
4 Rated power
5 Tension nominale
6 Nom. motor current
7 Notes
8 Fréquence
9 Operation Duty
10 Insulation class
11 Weight
12 Power factor
13 Rotation speed rpm
14 Protection
15 AAAA Year of manufacture
15 XXXX Serial number
16 Certifications
17 Maximum immersion depth
3 TECHNICAL FEATURES
3.1 Technical data
Dimensions and weight (paragraph 12.1).
Nominal speed 2800 rpm
.
3
Protection IP 68
Supply voltage / Frequency:
- up to 220-240V 1~ 50 Hz
Check that the mains frequency and voltage corre-
spond to the electrical characteristics shown on the
indicator plate.
Sound pressure at minimum immersion depth: < 70
dB (A).
Noise disappears or decreases when the pump is
submersed.
Maximum starts/hour: 30 at regular intervals.
Maximum permissible working pressure up to 10 m
(1 bar).
The max. inlet water pressure: PN (Pa) - Hmax (Pa).
4 SAFETY
4.1 General provisions
6 15
Montorso (VI) Italy
IT 00142630243
XXXXXX AAAAXXXX
X
3
Q min/max xx/xx m /h
cosø X
H max/min xx/xx m
X X
Imported by
calpeda
14
8 10
Before using the product it is necessary to
know all the safety indications.
Carefully read all operating instructions and
the indications defined for the different steps:
from transportation to disposal.
EN
17
16
11
X kg
X
9
X
12 4 7
Page 9 / 36