Chauvet Professional Legend 330SR Spot Manuel De Référence page 4

Legend™ 330SR Spot QRG
AC Power
AC Plug
Replacing the
Fuse
DMX Linking
DMX Connection
Mounting
Product
Mounting
Diagram
Control Panel
Description
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
Connection
AC Live
AC Neutral
AC Ground
1. Disconnect this product from power.
2. Using a Phillips #2 head screwdriver, unscrew the fuse holder cap
from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and
rating.
4. Screw the fuse holder cap back in place and reconnect power.
The Legend™ 330SR Spot will work with a DMX controller using a regular
DMX serial connection.
www.chauvetpro.com.
The Legend™ 330SR Spot uses a regular DMX data connection for its DMX
personalities: Mode1 (21) and Mode2 (27). See the User Manual to connect
and configure for DMX operation.
Overhead Mounting
Button
<MENU>
Exits from the current menu or function
Enables the currently displayed menu or sets the
<ENTER>
currently selected value into the selected function
Navigates upwards through the menu list and
<UP>
increases the numeric value when in a function
Navigates downwards through the menu list and
<DOWN>
decreases the numeric value when in a function
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
A DMX
Mounting Clamps
(such as CLP-15 or CLP-15N
clamp from Chauvet)
Safety Cable
(works with CH-05 from
Chauvet)
Function
4
Screw Color
Brown Yellow/Brass
Blue Silver
Green
Primer is available
Floor Mounting
Secure the safety cable using
the passageway on the back
of the product.
EN
from