CyberPower OR600ERM1U Mode D'emploi page 6

Power Switch
LCD Display Toggle/Selected Switch
Function
Local
Power
Quality
5
LCD FUNCTION SETUP GUIDE
LCD Display
▃ Low
▃▄ Normal
▃▄▅▆ High
(CUS)
*Only when high/ low
transfer voltage is
configured
Power On:
Press and hold the POWER button. You will hear a
constant tone for 1 second, followed by a short beep.
Release the button after the short beep.
Power Off:
Press and hold the POWER button. You will hear a
constant tone for 1 second, followed by two short
beeps. Release the button after the two short beeps.
Enter Setup Mode:
Press the select button for approximately 3 seconds to
access the 11 functions of the setup mode: Local
Power Quality, High Transfer Voltage, Low Transfer
Voltage, Sensitivity, Low Battery Warning, Self Test,
Buzzer Setting, LCD Sleep, Last Fault Reason, Back to
default, Escape item.
Select Function:
Short press the toggle to switch from the current item to
the next item.
Confirm Option:
When an option is selected, press the toggle for 3
seconds. The icons will stop flashing after the setting
has been confirmed
Options Default
Normal
(195V-25
7V)
Customer
Description
This function
determines how the
UPS switch to Battery
Mode.
3 different output
voltage ranges can be
chosen according to the
quality of the AC utility
service in your location.
If your utility service is
not stable, you can
select Low
(189V~271V). The UPS
will go to Battery Mode
less often to tolerate the
utility power
fluctuations.
If your utility service is
stable, you can select
High (207V~253V). The
unit will go to Battery
Mode more often.