Cleaning The Machine - Makita UB001G Manuel D'instruction

Hold the blower upright by grabbing the handle of the blower. Place
the outlet of the blower on the gutter and then turn on the blower.
MAINTENANCE
CAUTION:
Always be sure that the machine is
switched off and the battery cartridge is removed before
attempting to perform inspection or maintenance.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.

Cleaning the machine

Clean the machine by wiping off dust with a dry cloth or
one dipped in soapy water and wrung out.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
Remove dust or dirt from the suction inlet at the rear of
the machine.
► 1. Suction inlet
Storage
Before storing the machine, remove the battery car-
tridge from the machine, and perform full maintenance.
Store the machine in a place out of the reach of children
and not exposed to moisture, rain, or direct sunlight.
The hook hole on the bottom of the machine is conve-
nient for hanging the machine from a nail or screw on
the wall.
► 1. Hole
12 ENGLISH
1
1