Brandt B4306UHD LED Notice D'utilisation page 82

BASIC OPERATION
Make sure all necessary connections are correctly made before connecting the unit to the wall socket and
turning on the power.
Watching TV
1. Press the button to power on the unit.
2. Press the SOURCE button to select analog (ATV) or digital (DTV) as input source.
3. Choose the channel by pressing CH+ or CH- or by pressing the numeric buttons (combined [-/--] if
necessary) to
input the channel number directly.
Electronic Program Guide (EPG)
EPG stands for Digital Electronic Program Guide. It is supplied by the program providers and offers
information about the programs to be broadcast. You can access it in digital mode by pressing the EPG
button on the remote control, the menu will appear on the screen, as below:
Press ▲/▼navigation button to select preferred program
Press ◄/► navigation button to switch between left column and right column.
Press the RED button to set a recording.
Press the BLUE button to set a reminder.
Press the GREEN button to display the program guide of the previous day.
Press the YELLOW button to display the program guide of the following day.
Recording
1. In DTV mode, insert a formatted USB storage device, then press
watching.
The record menu will be showed on the screen.
2. Press / to move the cursor and use the numeric buttons to input your desired value and press OK
to confirm your setting.
EN-10
to record the program you are