Philips S9511/63 Mode D'emploi page 26

ENGLISH
26
4 Press the on/off button on the SmartClean
system to start the cleaning program.
, During the rinsing phase, the rinsing symbol
will flash.
Note: The rinsing phase takes approx. 10 minutes.
, During the drying phase, the drying symbol will
flash.
Note: The drying phase takes approx. 4 hours.
, When the cleaning program has been completed,
the ready symbol lights up continuously.
, The battery symbol lights up continuously to
indicate that the shaver is fully charged.
Note: Charging takes approx. 1 hour.
Note: If you press the on/off button of the
SmartClean system during the cleaning program, the
program aborts. In this case, the rinsing or drying
symbol stops flashing.
Note: If you remove the adapter from the wall socket
during the cleaning program, the program aborts.
Note: 30 minutes after the cleaning program and
charging have been completed, the SmartClean
switches off automatically.