Philips S9511/63 Mode D'emploi page 29

2 Place the retaining ring holder on the retaining
ring (1), turn it anticlockwise (2) and lift it off
the shaving head (3).
Remove the retaining ring from the retaining
ring holder and repeat this process for the other
retaining rings.
3 Remove the shaving heads from the shaving
head holder. Each shaving head consists of a
cutter and guard.
Note: Do not clean more than one cutter and guard
at a time, since they are all matching sets. If you
accidentally put a cutter in the wrong shaving guard,
it may take several weeks before optimal shaving
performance is restored.
4 Clean the cutter and guard under the tap.
5 After cleaning, place the cutter back into the
guard.
6 Put the shaving heads back into the shaving
head holder.
Note: Make sure the notches on both sides of the
shaving heads fit exactly onto the projections in the
shaving-head holder.
ENGLISH
29