Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
WARNING
fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater,
certain industrial chemicals, and bleach, or bleach-containing products, etc., can cause a short
circuit.
WARNING
could result in serious personal injury.
WARNING
is misuse and could result in a hazardous condition leading to possible serious injury.
WARNING
bling parts.
This cordless drill driver must be used only with the battery packs and chargers listed
below:
2Ah
2Ah
SKIL
SKIL
BY519701
BY519702
NOTICE: Please refer to the battery pack and charger manuals for detailed operating
information.
To Attach/Detach Battery Pack
Lock the trigger switch "OFF" on the tool by
placing the direction-of-rotation (forward/
center-lock/reverse) selector in the center
position.
To attach the battery pack:
Align the raised rib on the battery pack with the
grooves in the tool, and then slide the battery
pack onto the tool (Fig. 2).
NOTICE: When placing the battery pack on the
tool, be sure that the raised rib on the battery
pack aligns with the groove in the tool and that
the latches snap into place properly. Improper
attachment of the battery pack can cause
damage to internal components.
To reduce the risk of fire, personal injury, and product damage due to
a short circuit, never immerse your tool, battery pack or charger in
If any parts are damaged or missing, do not operate this product until
the parts are replaced. Use of this product with damaged or missing parts
Do not attempt to modify this tool or create accessories not
recommended for use with this tool. Any such alteration or modification
To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the tool when assem-
Battery Pack
2.5Ah
SKIL
BY519703
4Ah
5Ah
SKIL
SKIL
BY519601
BY519603
Fig. 2
Battery-
Release
Button
Charger
SKIL
SC535801
Attach
Detach
SKIL
QC536001
11
Publicité
