Schweizer eMag 240 HD Mode D'emploi page 34

Important Safety Information
Read and follow all warning notices and instructions marked on the product or included in the User's Guide.
Slots and openings in the product are provided for ventilation. To ensure reliable operation of the product

and to protect it from overheating, these slots and openings must not be blocked or covered.
Do not allow anything to rest on the power cable, and do not set up the product where persons will step

on the power cable.
Do not attempt to repair the product yourself: Opening the unit or removing covers can expose you to

dangerous voltages or other risks. Refer all servicing to qualified service personnel.
When installed, the product must comply with the applicable Safety Standards and regulatory re-

quirements of the country in which it is installed. If necessary, consult with the appropriate regulatory
agencies and inspection authorities to ensure compliance.
Always operate the product in a place where the temperature is between 10 °C and 35 °C (50° and

95° F).
Keep it away from wet areas, rain, and other liquids. Do not submerge the product.

Do not stare directly into the reading lamp, as the bright light can be harmful to the eyes.

Do not attempt to move the product without first locking the monitor and reading table.

34
Manufacturer:
Freedom Scientific GmbH
Bahnstr. 1
CH-8274 Tägerwilen