KTM A46002921500HA Instructions De Montage page 23

5.1 Assembly
Assembly, left side
Info
The steps are the same for the different controls of the
2- and 4-stroke models.
–
Loosen screw
–
Remove the original fixed grip.
–
Position fixed grip
502845-01
9
screw
Guideline
Diamond
Screw, fixed
grip
Assembly, right side
Info
The steps are the same for the different throttle grips of
the 2- and 4-stroke models.
–
Push back sleeve
–
Remove screws
–
Unhook throttle cables and take off original throttle grip.
502846-01
–
Position desired guide plate
included) on throttle grip
8
tube
Guideline
Label OUTSIDE must be visible. Marking
positioned above the marking
Info
The gray guide plate opens the throttle valve more
502847-01
slowly.
The black guide plate opens the throttle valve more
quickly.
–
Clean the outside of the handlebar and the inside of the
grip tube.
–
Position throttle grip
–
Attach the throttle cables to the guide plate and route cor-
rectly.
502848-01
9
.
1
(included) on handlebar and tighten
.
A
must be located at the top.
M4 5 Nm (3.7 lbf ft)
bk
.
bl bm
and half-shells
3 4 5
, ,
2
(included) or twister throttle
(included).
C
.
1
on the handlebar.
ASSEMBLY 5
Loctite ® 243™
.
6 7
, or (all
B
must be
9