Kostal Smart Energy Meter G2 Manuel D'installation page 110

Installation instructions
Calling up online interface via network environment in Windows
1.
In Windows, in File Explorer click on "Network" or open the Start menu
using the Windows button and click on "Devices and printers".
An icon entitled KOSTAL Smart Energy Meter (e.g. KSEM-712345678)
should be visible.
2.
Click on the icon – the standard browser opens with the KOSTAL Smart
Energy Meter log-on page.
Note: The target network must not be classified in the PC as "Public network"
otherwise this function will be blocked by Windows.
Using HTTPS in the browser
To use the KOSTAL Smart Energy Meter with HTTPS in the browser, enter
"https://" in the address line.
Note: Because the KOSTAL Smart Energy Meter's online interface is not a
website registered on the Internet, the browser will display it as unsafe. To call
up the online interface anyway, the browser's warning must be ignored and a
one-off or permanent exception added under "Advanced settings".
Configuring settings
Set the KOSTAL Smart Energy Meter's interfaces (RS485 Modbus) to suit
the connected inverter. Under Modbus settings, you only need to select one
inverter to the interface to do this. The appropriate values are stored as stand-
ard. However, you can adapt the values if necessary.
110 © 2022 KOSTAL Solar Electric GmbH