Kostal Smart Energy Meter G2 Manuel D'installation page 101

Designation
L1, L2, L3
N
IN
OUT
1 Energy supplier's energy meter
2 Off switch or fuse
3 Consumer device
Ensure that the maximum permitted current of 63 A per phase is not exceeded,
e.g. using a fuse.
1.
Mount KOSTAL Smart Energy Meter on top-hat rail. To do this, hook the
KOSTAL Smart Energy Meter onto the upper edge of the top-hat rail and
press on until it snaps into place.
© 2022 KOSTAL Solar Electric GmbH
Explanation
External wire
Neutral wire
Meter input (mains side)
Meter output (consumer side)
EN
101