Kostal Smart Energy Meter G2 Manuel D'installation page 109

Commissioning
Note: Connect the KOSTAL Smart Energy Meter to an existing local network.
1.
Connect network cable to KOSTAL Smart Energy Meter's grid
connection.
2.
Connect the other end of the network cable to a router/switch or directly
to the PC/laptop.
Calling up user interface
Calling up user interface using host name
Enter host name of KOSTAL Smart Energy Meter in your browser's address
line. The factory host name is made up of the product name and serial number.
To log in you will need the password from the KOSTAL Smart Energy Meter's
type plate, which can be found on the separate instruction leaflet in the
packaging.
Example: KSEM-712345678
Note: This function depends on the router settings and may not be available in
larger administered networks under some circumstances.
© 2022 KOSTAL Solar Electric GmbH
PC/Laptop
EN
109