en Basic operation
Tip: If you want to stop the dispens-
ing process early, press
want to stop the dispensing process
altogether, press
Dispensing special drinks
Your appliance has other drinks be-
sides the ones that you can obtain
via the quick-selection buttons.
Press
several times.
▶
→ "Drinks overview", Page 14
Dispensing milk froth
WARNING
Risk of burns!
The milk system can become ex-
tremely hot.
Never touch the milk system when
▶
it is hot.
Allow the hot milk system to cool
▶
down before touching it.
Requirements
¡ The milk container has been con-
nected.
¡ The milk container has been filled
with milk.
Place your pre-warmed cup under
1.
the outlet system.
Press
repeatedly until the dis-
2.
play shows "Milk froth".
Change the setting if necessary:
3.
Use
to adjust the amount.
‒
→ "Adjusting the amount",
Page 21
Press
.
4.
a The milk froth will run out of the
outlet system.
Press
to stop the dispensing
5.
process.
20
. If you
.
Dispensing hot water
WARNING
Risk of burns!
The milk system can become ex-
tremely hot.
Never touch the milk system when
▶
it is hot.
Allow the hot milk system to cool
▶
down before touching it.
Note: If the milk system has not been
cleaned, small amounts of milk may
be dispensed with the water.
Requirement: The milk system has
been cleaned.
→ "Cleaning the milk system",
Page 26.
Place your pre-warmed cup under
1.
the outlet system.
Press
repeatedly until the dis-
2.
play shows "Hot water".
Change the setting if necessary:
3.
Use
to adjust the amount.
‒
→ "Adjusting the amount",
Page 21
Press
.
4.
a Hot water will run out of the outlet
system.
Press
to stop the dispensing
5.
process.
Drink settings
Prepare a drink according to your
taste.
Adjusting the coffee strength
Press the symbol for your desired
1.
drink.
To select the strength of the cof-
2.
fee, press
.
You can select the following coffee
strengths:
– "mild"
– "regular"