Chauvin Arnoux DigiFlex MA400D Notice De Fonctionnement page 16

Thank you for purchasing a DigiFLEX MA400D current
meter with flexible sensor. For best results from your
instrument:
■ read this user's manual carefully,
■ comply with the precautions for use.
WARNING, risk of DANGER! The operator must
refer to these instructions whenever this danger
symbol appears.
Equipment protected by double insulation.
Must not be applied to or removed from bare
conductors at dangerous voltages. Type B cur-
rent sensor as per IEC/EN 61010-2-032 or BS
EN 61010-2-032.
Battery.
The CE marking indicates compliance with
the European Low Voltage Directive (2014/35/
EU), Electromagnetic Compatibility Directive
(2014/30/EU), and Restriction of Hazardous
Substances Directive (RoHS, 2011/65/EU and
2015/863/EU).
The UKCA marking certifies that the product is
compliant with the requirements that apply in the
United Kingdom, in particular as regards Low-
Voltage Safety, Electromagnetic Compatibility,
and the Restriction of Hazardous Substances.
The rubbish bin with a line through it indicates
that, in the European Union, the product must
undergo selective disposal in compliance with
Directive WEEE 2012/19/EU. This equipment
must not be treated as household waste.
Definition of measurement categories
■ Measurement category IV corresponds to measurements
taken at the source of low-voltage installations.
■ Measurement category III corresponds to measurements
on building installations.
■ Measurement category II corresponds to measurements
taken on circuits directly connected to low-voltage instal-
lations.
ENGLISH
16