Publicité
Les langues disponibles
Les langues disponibles
Select the „Editing the camera IP address" option to open a window for setting the cam-
eras IP properties. When you are done click the „Activate" button to update the camera
settings.
For further information, please refer to the eneo Scan Device Tool Quick Start Guide.
Quick Network Setup
The network camera's default IP address is: 192.168.1.10.
Therefore, to access the camera for the first time, set the PC's address as 192.168.1.XX; for
example:
IP Address: 192.168.1.20
Subnet Mask: 255.255.255.0
• Enter the camera's IP address in the URL bar of the Web browser window and hit
"Enter. "
• Enter the default user name (root) and password (root) in the prompt request
dialogue. It is also possible to reset IP parameters to the original factory default
settings by pressing the IP reset.
• If the Information message doesn't come out due to the problems like network
failure, you can start the manual installation.
• Click the Install ActiveX Control, and the pop-up window will be displayed. After
the installation is successfully completed, Smart Viewer window will be displayed.
EN
7
Publicité
